With a height of 60 mm. At the front side, at a height of 50 mm, the divider has a hole which allows the use of the tubes, for preventing the products to fall off the shelf.

With a height of 120 mm. At the front side, at a height of 50, 75 and 100 mm, the divider have three holes which allow the use of the tubes, in order to prevent the falling of the products off the shelves. The height at which you assemble the tube may be chosen depending on the products dimensions.

With a height of 25 mm. They are designed for products of rather small dimensions. Extremely suitable for cosmetic products or for cigarettes.

With a height of 60 mm. At the front side, at a height of 50 mm, the divider has a hole which allows the use of the tubes, for preventing the products to fall of the shelf.

Front stoppers for shelf divider systems. Accessories which grant the attaching of a front to the PRIMA 1 and PRIMA 2 shelf divider systems, as for both 60 mm and 120 mm height.

Front dividers PRIMA 3 from unbreakable polycarbonate with a thickness of 2,5 mm and two fixing points. We recommend them for products with a high sliding risk or for inclined shelves. Sizes: 120 x 435 mm.

Shelf divider from unbreakable polycarbonate, with a thickness of 3 mm, with two fixing points and front stopper. The design of the terminal part of the divider system offers the possibility to use it as well with front stopper, as also without, in which case the divider system will be assembled with the terminal part towards the shelf edge. With a height of 60 mm.

Shelf divider from unbreakable polycarbonate, with a thickness of 3 mm, with two fixing points and front stopper. The design of the terminal part of the divider system offers the possibility to use it as well with front stopper, as also without, in which case the divider system will be assembled with the terminal part towards the shelf edge. With a height of 120 mm.

Shelf divider from unbreakable polycarbonate, with a thickness of 4 mm, with two fixing points, with a height of 200 mm. Due to its solid construction, it is recommended to be used for heavy products or for products with of big volume.

Toothed rail for the PRIMA 1 shelf divider systems. Sizes: 297,5 x 24 mm and profile of 6 mm. It is used in the back area of the shelves and provides the fixing of the shelf divider systems in vertical plane. They are supplied with connectors used at the inter-joining of the segments. Standard color: grey.

Rail, for stabilizing of the PRIMA divider systems. We recommend it as the best solution for the dividers subject to high mechanic strengths, which separate heavy and/or round products, as for example pressed cheese. Standard color: grey.

Extruded T divider system for deep-freezers and show cases with milk or meat products. The special material resists best at low temperatures. Standard color: clear. Supply unit: 100 pcs.

Pusher with front stopper 52 x 16 mm (L x H), width of the pushing plan: 40 mm. The front stopper allows the inserting of a label with sizes of 50 x 13 mm. Available in a wide scale of pushing forces. Maximum recommended expansion length: 500 mm.

Pusher with front stopper 52 x 35 mm (L x H), width of the pushing plan: 40 mm. The front stopper allows the inserting of a label with sizes of 50 x 30 mm. Available in a wide scale of pushing forces. Maximum recommended expansion: length 500 mm.

Pusher with front stopper, 15 x 42 mm (H x L), compatible with the PRIMA 4 divider systems. Available in a wide scale of pushing forces. Back width: 40 mm. Maximum recommended expansion: 500 mm.

Pusher with front stopper, 30 x 42 mm (H x L), compatible with the PRIMA 4 divider systems. Available in a wide scale of pushing forces. Back width: 40 mm. Maximum recommended expansion: 500 mm.

Rail pusher, with two pusher scales: 6 and 9 N. The rails have lengths ranging between 185 and 485 mm, with a pace of 25 mm.